MC25

The GLW MC 25 processes wire end sleeves automatically with a cross section of 0.5 to 2.5 square millimetres and a standard length of 8 mm.

You can change the applicator for the diameter of the sleeves in a matter of seconds without any additional tools. Just snap it into place and off you go!

All applicators are clearly arranged in a kit that comes with the crimper.

Reliable operation thanks to an advanced microprocessor-controlled cam drive.

The stripping unit is fitted with V-blades. It can be used for most commercially available conductors.

Tape-mounted wire end sleeves are fed into the machine via a dispenser fitted to its right side.

Technical Data MC 25

Mains power: 230 V / 50 Hz

Power input: 80 VA

Operating range: 0,5 - 2,5 mm² / 20 -14 AWG

Wire end sleeves: in accordance with DIN 46 228 part 4 tape mounted

Crimp section: trapezoidal

Cycle: 1.5 s approx.

Control: microprocessor-controlled cam drive

Unit Counter: LCD display

Changing applicators: under 10 s

Dimensions: 165 x 270 x 320 mm (W x H x D)

Weight: 12 kg